Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 289)

Brocade Network Advisor IP User Manual 235
53-1003153-01
Dashboard customization
7
• SFP Temperature — The physical temperature of the SFP transceiver, in degrees Celsius.
• SFP Power On Hours — The number of hours the 16 Gbps SFP transceiver is powered on.
• Refreshed — The time of the last update for the widget.
Network OS Fabric Watch violations with appropriate counter values are displayed for the following
categories.
• Abnormal Frame Terminations — The number of frames abnormally terminated.
• Symbol Errors — The number of undefined or invalid symbols received.
• IFG (InterFrame Gap) Errors — The interframe gap between successive frames that is violated.
Customizing the Port Health Violations widget
You can customize the widget to display violations for a specific fabric and time frame.
• To display data for a specific fabric or group, refer to “Setting the network scope” on page 221.
• To display data for a specific duration, refer to “Setting the time interval” on page 223.
• Sort the contents by clicking the column header. Click the same column header again to
reverse the sort order.
Performance monitors
The Management application provides the following preconfigured performance monitors:
TABLE 22 Preconfigure performance monitors
Monitor title Description Data collectors
Top Port Alignment Errors Table view of the alignment errors measure All SAN TE port collector
Top Port C3 Discards Table view of the C3 discards measure All SAN FC port collector
Top Port C3 Discards RX TO Table view of the C3 discards RX TO measure. There are
four versions of this monitor based on the type of port: All
ports, initiator ports, ISL ports, and Target ports. All SAN FC port collector
Top Port CRC Errors Table view of the CRC errors measure. There are four
versions of this monitor based on the type of port: All
ports, initiator ports, ISL ports, and Target ports. All SAN FC port collector, All SAN TE port
collector
Top Port Encode Error Out Table view of the encode error out measure. There are four
versions of this monitor based on the type of port: All
ports, initiator ports, ISL ports, and Target ports. All SAN FC port collector
Top Port Errors Table view of the errors measure Port error count collector
Top Port Overflow Errors Table view of the overflow errors measure All SAN TE port collector
Top Port Receive EOF Table view of the received end-of-frames measure All SAN TE port collector
Top Port Runtime Errors Table view of the runtime errors measure All SAN TE port collector
Top Port Sync Losses Table view of the top port synchronization losses. There
are four versions of this monitor based on the type of port:
All ports, initiator ports, ISL ports, and Target ports. All SAN FC port collector
Top Port Too Long Errors Table view of the too long errors measure All SAN TE port collector
Top Port Traffic Table view of the traffic measure All SAN FCIP tunnel collector, All SAN FC port
collector, port throughput collector, All SAN
TE port collector