Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 218)

164 Brocade Network Advisor IP User Manual
53-1003153-01
Software Configuration
5
1. Choose one of the following options:
• On Windows systems, select Start > Programs > Management_Application 12.X.X >
Management_Application Configuration.
• On UNIX systems, execute
sh Install_Home/bin/configwizard
on the terminal.
2. Click Next on the Welcome screen.
3. Click Yes on the confirmation message.
4. Click Next on the FTP Server screen.
5. Complete the following steps on the Server IP Configuration screen ( Figure 67 ).
FIGURE 67 Server IP Configuration screen
a. Select an address from the Server IP Configuration list.
b. Select an address from the Switch - Server IP Configuration Preferred Address list.
NOTE
If the “hostname” contains invalid characters, the host name does not display in the list.
Valid characters include alphanumeric and dash (-) characters. The IP address is selected
by default. If the an IPv6 address is selected, server start up will fail.
If DNS is not configured for your network, do not select the ‘hostname’ option from either
the Server IP Configuration or Switch - Server IP Configuration Preferred Address list.
Selecting the ‘hostname’ option prevents clients and devices from communicating with
the Server.
c. Click Next.
6. Click Next on the Server Configuration screen.
7. Click Next on the SMI Agent Configuration screen.
8. Verify the IP address on the Server Configuration Summary screen and click Next.
9. Click Finish on the Start Server screen.
10. Click Yes on the restart server confirmation message.
11. Choose one of the following options:
• If you configured authentication to CAC, enter your PIN in the CAC PIN field.