Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 284)

230 Brocade Network Advisor IP User Manual
53-1003153-01
Dashboard customization
7
• Firmware — Displays the product inventory by firmware release.
• Model — Displays the product inventory by model.
• Product Type — Displays the product inventory by product type.
• Location — Displays the product inventory by physical location.
• Contact — Displays the product inventory by contact name.
IP Status widget
The IP Status widget ( Figure 86 ) displays the device status as a pie chart. If you discover a DCB
switch from the IP tab, the switch status only displays in the IP Status widget. However, if you
discover a DCB switch from the SAN tab, the switch status displays in both the SAN Status and IP
Status widgets.
FIGURE 86 IP Status widget
The IP Status widget includes the following data:
• Widget title — The name of the widget.
• Show Legend icon — Click to display the color legend for the widget below the pie chart.
• Widget summary — The product count for each status (worst to best order) with the associated
icon displays underneath the widget title.
• Pie chart — The device status as a percentage of the total number of devices.
The pie chart displays the percentage in various colors on each slice. Tooltips showing the
number of devices in that state are shown when you pause on the bar. When there is one
status category with less than one percent of the total number of devices, the status widget
displays the number of devices in each category on each slice. Double-click a section in the
graph to navigate to the IP Inventory Detailed View page. For more information, refer to
“Viewing additional IP product data” on page 231.
For a VCS fabric, status is determined by the reachability of the individual members of the VCS
fabric. The IP Status widget displays the most severe reachability of a member of the VCS
fabric. For example, if one member of the VCS fabric has a reachability status of “degraded”
and all other members are ‘reachable’, then the VCS fabric status displays as “degraded”.