Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 325
Brocade Network Advisor IP User Manual
271
53-1003153-01
Inventory
7
•
Performance graph/table — Displays the performance data when configured. To configure
a graph or table, refer to
“Configuring a port measure performance graph”
•
Show/Hide Legend button — Click to show or hide the performance graph legend.
•
Close Performance button — Click to close the performance graph or table.
•
Update button — Select or clear the ports in the table and click to update the graph or
table.
•
Settings button — Click to change the port measure selection you want to include in the
graph or table or to change the time scope for the graph or table. To configure a graph or
table, refer to
“Configuring a port measure performance graph”
•
Graph button — Click to show the performance data in a graph. The x-axis displays the time
scope you selected. The y-axis display depends on the performance measure you selected.
If you have not selected performance measures, the graph displays receive and transmit
utilization measures by default.
•
Table button — Click to show the performance data in a table. The table includes the
performance measures you selected and the time the measure was collected. If you have
not selected performance measures, the table displays receive and transmit utilization
measures by default.
•
Unnamed check box — Select the check box for each port you want to include in the graph.
Select the check box in the table header to select all ports in the table.
•
Name — Displays the name of the port. Click to launch the Port summary view (refer to
•
Identifier — Displays the port ID.
•
MAC Address — Displays the MAC address of the port.
•
State — Displays the state (offline or online) of the port.
•
Status — Displays the status of the port.
•
Type — Displays the type of port.
•
Port WWN — Displays the world wide name (WWN) of the port.
•
Speed — Displays the speed of the port in gigabits per second.
•
Attached Port # — Displays the port number of the attached device.
•
Connected Switch — Displays the name of the switch connected to the port.