Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 475
Brocade Network Advisor IP User Manual
423
53-1003153-01
Host Topology view
9
•
Description. Displays the description of the product. This field is editable at the fabric level.
•
Domain ID. Displays the Domain ID for the product in the format xx(yy), where xx is the
normalized value and yy is the actual value on the wire.
•
FC Address. Displays the Fibre Channel address of the port.
•
Firmware. Displays the firmware version of the product.
•
IP Address. Displays the IP address (IPv4 or IPv6 format) of the product.
•
Location. Displays the physical location of the product. This field is editable at the fabric level.
•
Model. Displays the model number of the product.
•
Name. Displays the name of the product. This field is editable at the fabric, device, and port
level.
•
Port #. Displays the number of the port.
•
Port Count. Displays the number of ports on the product.
•
Port Type. Displays the type of port (for example, expansion port, node port, or NL_port).
•
Product Type. Displays the type of product.
•
Protocol. Displays the protocol for the port.
•
Serial #. Displays the serial number of the product.
•
Speed Configured (Gbps). Displays the actual speed of the port in Gigabits per second.
•
State. Displays the state for the product and the port.
•
Status. Displays the status for the product and the port.
•
Symbolic Name. Displays the symbolic name for the port.
•
TAG. Displays the tag number of the product.
•
Vendor. Displays the name of the product’s vendor.
•
WWN. Displays the world wide name of the product or port.
•
Zone Alias. Displays the zone alias of the product or port.
•
User-defined property labels — Displays the user-defined property labels. You can create up to
three user-defined property labels.
For more information about the components and customization of the topology map, refer to the
following sections:
•
•
•
For more information about functions you can perform on the topology map, refer to