Cli configuration scheduling, Configuring a one-time deployment schedule, Configuring an hourly deployment schedule – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 983
Brocade Network Advisor IP User Manual
931
53-1003153-01
CLI configuration scheduling
26
3. Choose one of the following options:
•
To display a report for one device, click the IP address of the device on the list.
•
To display a report that includes all devices for which the report was generated, click the
name of the report in the Template Name column.
The Product CLI Report displays.
To export a report refer to
“Exporting and saving IP reports to a file”
CLI configuration scheduling
You can configure when and how often to run each configured CLI template. Options include:
•
“Configuring a one-time deployment schedule”
•
“Configuring an hourly deployment schedule”
•
“Configuring a daily deployment schedule”
•
Weekly (refer to
“Configuring a weekly deployment schedule”
•
Monthly (refer to
“Configuring a monthly deployment schedule”
•
Yearly (refer to
“Configuring a yearly deployment schedule”
Configuring a one-time deployment schedule
To configure a one-time schedule, complete the following steps.
1. Select One Time from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 1 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Click the Date list to select a date from the calendar.
To finish configuring the CLI template, return to
of
Configuring an hourly deployment schedule
To configure an hourly schedule, complete the following steps.
1. Select Hourly from the Frequency list.
2. Select the minute past the hour you want deployment to run from the Minutes past the hour
list.
Where the minute value is from 00 through 59.
To finish configuring the deployment schedule, return to