Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 557)

Brocade Network Advisor IP User Manual 505
53-1003153-01
LDAP server configuration
13
4. Type mmc and press Enter.
5. Select File > Add/Remove Snap-in.
The Add/Remove Snap-in dialog box displays.
6. Click Add.
The Add Standalone Snap-in dialog box displays.
7. Select Active Directory Schema from the Available standalone snap-ins list and click Add.
8. Click Close on the Add Standalone Snap-in dialog box.
The Active Directory Schema displays in the Add/Remove Snap-in dialog box.
9. Click OK on the Add/Remove Snap-in dialog box.
10. Save this schema by selecting File > Save As.
11. Browse to the following location: C:\Windows\System32.
12. Change the extention to .msc and click Save.
13. Select Start > Run.
14. Type schema_name.msc and press Enter.
Make sure that the schema that you just saved launches successfully. To configure roles and
AORS for this schema, go to
step 8 of “Configuring roles and AORs on the external LDAP server”
on page 503.
Configuring authorization details on the external LDAP server
Open the ADSI Edit dialog box on the Active Directory installed server.
1. Select Start > Run.
2. Type adsiedit.msc and press Enter.
The ADSI Edit dialog box displays.
3. Right-click CN=User_Name in the CN=Users directory and select Properties.
Where User_Name is the name of the user you created in “Creating an AD user account” on
page 502.
The CN=User_Name Properties dialog box displays.
4. Select NmAors in the Attributes list and click Edit.
The String Attribute Editor dialog box displays.
5. Enter the areas of responsibility (such as, All IP Productsand All Hosts) in the Value field and
click OK..
6. Select NmRoles in the Attributes list and click Edit.
7. Enter the Management application user roles (such as Host Administrator, IP System
Administrator, Network Administrator, Operator, Report User Group, Security Administrator,
Security Officer, and Zone Administrator) in the Value field and click OK.
8. Close the ADSI Edit dialog box.