Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 493)

Brocade Network Advisor IP User Manual 441
53-1003153-01
Viewing a MRP ring
10
When you select a device on the Topology Map, the application highlights the device in the
Product List.
Viewing a MRP ring
To view a MRP ring, click a ring in the Product List.
The selected ring displays in the Topology Map.
FIGURE 191 MRP Topology dialog box
MRP Topology maps are comprised of nodes (rings) and connections (devices). Table 43 displays
the basic elements included in a MRP topology map.
TABLE 43 MRP Topology map elements
Element Description
Device icon Each device on the map displays its device name and IP address.
[MASTER] Denotes the master device.
solid line
The nodes on the ring are connected and in normal operating state.
- - - - - - - - - - - - - - - -
broken line The two end points of an MRP link are disabled. To show a broken line on the
topology, refer to
“Configuring the application to show a dashed line” on
page 443
link with arrow head
The port is in a pre-forwarding or forwarding state and shows the direction of
the packet flow.