Brocade Network Advisor IP User Manual v12.3.0 User Manual

Page 63

Advertising

Brocade Network Advisor IP User Manual

53-1003153-01

Management server and client

d. Enter a port number in the Starting Port Number field (default is 24600).

NOTE

For Professional software, the server requires 15 consecutive free ports beginning with
the starting port number.

NOTE

For Trial and Licensed software, the server requires 18 consecutive free ports beginning
with the starting port number.

e. Enter a port number in the Syslog Port Number field (default is 514).

NOTE

If the default syslog port number is already in use, you will not receive any syslog
messages from the device. To find and stop the process currently running on the default
Syslog port number, refer to the Installation and Migration Guide.

Enter a port number in the SNMP Port Number field (default is 162).

g. Click Next.

If you enter a syslog port number already in use, a message displays. Click No on the
message to remain on the Server Configuration screen and edit the syslog port number
(return to step 6a). Click Yes to close the message and continue with step 7.

If you enter a port number already in use, a Warning displays next to the associated port
number field. Edit that port number and click Next.

7. Verify your configuration information on the Server Configuration Summary screen and click

Next.

8. Complete the following steps on the Start Server screen:

a. Select the Start Client check box, if necessary.

b. Click Finish.

After all of the services (Server and Client) are started, the Log In dialog box displays.

9. Click Yes on the restart server confirmation message.

10. Choose one of the following options:

•

If you configured authentication to CAC, enter your PIN in the CAC PIN field.

•

If you configured authentication to the local database, an external server (RADIUS, LDAP,
or TACACS+) or a switch, enter your user name and password.
The defaults are Administrator and password, respectively.

NOTE

Do not enter Domain\User_Name in the User ID field for LDAP server authentication.