Brocade Network Advisor IP User Manual v12.3.0 - Manual (Page 1074)

1022 Brocade Network Advisor IP User Manual
53-1003153-01
VPLS Manager
29
a. Click the empty Outer VLAN ID field and enter the VLAN ID you want to use.
b. Click the empty Inner VLAN ID field and enter the VLAN ID you want to use. Skip this step if
you are using single tagging.
4. Click Next.
The Deploy Target Actions dialog box displays ( Figure 433 ).
FIGURE 433 VPLS Configuration wizard Deploy Target Action dialog box
The VPLS instance name and VCID are shown in the Name and VCID fields.
Deploying target actions using VPLS Manager
1. From the Deploy Target Actions pane, the Endpoint Targets column lists the names and IP
addresses of the devices to which the VPLS instance will be deployed. Expand the folder for a
device to display any VLANs and ports to which the VPLS instance will be deployed.
The Actions column displays the action that will be taken when the VPLS instance is deployed
to the devices. Possible actions are:
• CREATE: Adds the configuration to the device.
• DELETE: Removes the configuration from the device.
• UPDATE: Modifies the configuration on the device if the configuration is being edited.
• NOOP: No change is required.
2. Click Next.
The Deployment Properties page displays ( Figure 434 ).