Brocade Network Advisor IP User Manual v12.3.0 User Manual

Page 553

Advertising
background image

Brocade Network Advisor IP User Manual

501

53-1003153-01

Radius server configuration

13

1. Open the user configuration file (such as users.conf) a text editor (such as Notepad).

2. Enter the user data as follows:

user_name User-Password = "password"

NM-Roles-AORs-List = "nmRoles=management_roles; nmAORs=management_AORs"

where management_roles is one or more of the following roles (separated by commas):

Host Administrator, IP System Administrator, Network Administrator, Operator, Report User
Group, Security Administrator, Security Officer, and Zone Administrator

and management_AORs is one or more of the following AORs (separated by commas):

All IP Products or All Hosts

For example:

jsmith User-Password = "password"

NM-Roles-AORs-List = "nmRoles=Host Administrator,IP System

Administrator,Network Administrator,Operator,Report User Group,Security

Administrator,Security Officer,Zone Administrator; nmAORs=All IP ProductsAll

Hosts"

3. Enter the following to make the default authentication type PAP:

DEFAULT Auth-Type = PAP

4. Save and close the file.

Configuring the dictionary file for the Radius server

The dictionary file defines the symbolic names for Radius attributes and values.

1. Copy the Management application dictionary file (dictionary.NM_AAA_dictionary) located in the

Install_Home/docs/Auth directory to the Radius server dictionary directory.

1. Open the dictionary configuration file (dictionary.NM_AAA_dictionary) a text editor (such as

Notepad).

The dictionary file contains the following information:

VENDOR

vendor_name

vendor_id_number

BEGIN-VENDOR

vendor_name

ATTRIBUTE

NM-Roles-AORs-List

1

string

END-VENDOR

vendor_name

2. Change the attribute to use the sequence number 9 as follows.

ATTRIBUTE

NM-Roles-AORs-List

9

string

3. Save and close the file.

4. Open the Radius server dictionary file in a text editor (such as Notepad).

5. Enter the following to add the Management application dictionary file to the Radius server

dictionary file:

$INCLUDE dictonary.NM_AAA_dictionary

Advertising