Bottom port utilization percentage monitor – Brocade Network Advisor IP User Manual v12.3.0 User Manual
Page 415
Brocade Network Advisor IP User Manual
363
53-1003153-01
Performance monitors
8
Bottom Port Utilization Percentage monitor
The Bottom Port Utilization Percentage monitor (
) displays the bottom port utilization
percentages in a table.
FIGURE 163
Bottom Port Utilization Percentage monitor
The Top Port Utilization Percentage monitor includes the following data:
•
Severity icon/monitor title — The worst severity of the data shown next to the monitor title.
•
Port — The port affected by this monitor.
•
Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
-
Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
-
Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
-
Target — The target port on the connected device. Click to launch the device properties
dialog box.
•
RX Port Utilization Percentage — The bottom receive port utilization percentages.
•
TX Port Utilization Percentage — The bottom transmit port utilization percentages.
•
Product — The product affected by this monitor.
•
Type — The type of port (for example, U-Port).
•
Identifier — The port identifier.
•
Port Number — The port number.
•
State — The port state (for example, Enabled).
•
Status — The port status (for example, Up).
•
Refreshed — The time of the last update for the monitor.
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to