Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 1008)

958 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Remote Monitoring
42
FIGURE 274 Showing Configured RMON History Samples
To show collected RMON history samples:
1. Click Administration, RMON.
2. Select Configure Interface from the Step list.
3. Select Show Details from the Action list.
4. Select a port from the list.
5. Click History.
FIGURE 275 Showing Collected RMON History Samples
Configuring RMON Statistical Samples
Use the Administration > RMON (Configure Interface - Add - Statistics) page to collect statistics on a
port, which can subsequently be used to monitor the network for common errors and overall traffic
rates.
CLI References
• “Remote Monitoring Commands” on page 127
Command Usage
• If statistics collection is already enabled on an interface, the entry must be deleted before any
changes can be made.