Configuring vlan translation, Figure 100 confi, Figure 101 s – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 797: Vlan translation

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

747

53-1002581-01

Configuring VLAN Translation

34

FIGURE 100

Configuring VLAN Mirroring

To show the VLANs to be mirrored:

1. Click VLAN, Mirror.

2. Select Show from the Action list.

FIGURE 101

Showing the VLANs to Mirror

Configuring VLAN Translation

Use the VLAN > Translation (Add) page to map VLAN IDs between the customer and service
provider for networks that do not support IEEE 802.1Q tunneling.

CLI References

“Configuring VLAN Translation” on page 397

Command Usage

QinQ tunneling uses double tagging to preserve the customer’s VLAN tags on traffic crossing
the service provider’s network. However, if any switch in the path crossing the service
provider’s network does not support this feature, then the switches directly connected to that
device can be configured to swap the customer’s VLAN ID with the service provider’s VLAN ID
for upstream traffic, or the service provider’s VLAN ID with the customer’s VLAN ID for
downstream traffic.

Advertising