Sflow source, Sflow timeout, Sflow source sflow timeout – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 189

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

139

53-1002581-01

Flow Sampling Commands

8

Example

This example sets the sample rate to 1 out of every 100 packets.

Console(config)#interface ethernet 1/9

Console(config-if)#sflow sample 100

Console(config-if)#

sflow source

This command enables sFlow on the source ports to be monitored. Use the no form to disable
sFlow on the specified ports.

Syntax

[no] sflow source

Default Setting

Disabled

Command Mode

Interface Configuration (Ethernet)

Example

This example enables flow control on ports 9 through 16.

Console(config)#interface ethernet 1/9

Console(config-if)#sflow source

Console(config-if)#

sflow timeout

This command configures the length of time samples are sent to the Collector before resetting all
sFlow port parameters. Use the no form to restore the default time out.

Syntax

sflow timeout seconds

no sflow timeout

seconds - The length of time the sFlow process continuously sends samples to the
Collector before resetting all sFlow port parameters. (Range: 0-10000000 seconds, where
0 indicates no time out)

Default Setting

Disabled

Command Mode

Interface Configuration (Ethernet)

Advertising