Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 707)

Brocade 6910 Ethernet Access Switch Configuration Guide 657
53-1002581-01
Managing System Files
32
FIGURE 14 Setting Start-Up Files
To start using the new firmware or configuration settings, reboot the system via the System > Reset
menu.
Showing System Files
Use the System > File (Show) page to show the files in the system directory, or to delete a file.
NOTE
Files designated for start-up, and the Factory_Default_Config.cfg file, cannot be deleted.
CLI References
• "dir" on page 70
• "delete" on page 70
Interface
To show the system files:
1. Click System, then File.
2. Select Show from the Action list.
3. To delete a file, mark it in the File List and click Delete.
FIGURE 15 Displaying System Files