Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 908)

858 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Access Control Lists
41
• Mode
• Absolute – Specifies a specific time or time range.
• Start/End – Specifies the hours, minutes, month, day, and year at which to start or
end.
• Periodic – Specifies a periodic interval.
• Start/To – Specifies the days of the week, hours, and minutes at which to start or end.
Interface
To configure a time range:
1. Click Security, ACL.
2. Select Configure Time Range from the Step list.
3. Select Add from the Action list.
4. Enter the name of a time range.
5. Click Apply.
FIGURE 195 Setting the Name of a Time Range
To show a list of time ranges:
1. Click Security, ACL.
2. Select Configure Time Range from the Step list.
3. Select Show from the Action list.
FIGURE 196 Showing a List of Time Ranges
To configure a rule for a time range:
1. Click Security, ACL.
2. Select Configure Time Range from the Step list.