Clear mac-address-table dynamic, Show mac-address-table – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 379

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

329

53-1002581-01

Address Table Commands

17

clear mac-address-table dynamic

This command removes any learned entries from the forwarding database.

Default Setting

None

Command Mode

Privileged Exec

Example

Console#clear mac-address-table dynamic

Console#

show mac-address-table

This command shows classes of entries in the bridge-forwarding database.

Syntax

show mac-address-table [address mac-address [mask]] [interface interface] [vlan vlan-id]

[sort {address | vlan | interface}]

mac-address - MAC address.

mask - Bits to match in the address.

interface

ethernet unit/port

unit - Unit identifier. (Range: 1)

port - Port number. (Range: 1-12)

port-channel channel-id (Range: 1-12)

vlan-id - VLAN ID (Range: 1-4093)

sort - Sort by address, vlan or interface.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

•

The MAC Address Table contains the MAC addresses associated with each interface. Note that
the Type field may include the following types:

•

Learn - Dynamic address entries

•

Config - Static entry

Advertising