Clear efm oam counters, Efm oam remote-loopback, Clear efm oam counters efm oam remote-loopback – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 617

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

567

53-1002581-01

OAM Commands

26

Command Mode

Interface Configuration

Command Usage

When set to active mode, the selected interface will initiate the OAM discovery process. When in
passive mode, it can only respond to discovery messages.

Example

Console(config)#interface ethernet 1/1

Console(config-if)#efm oam mode active

Console(config-if)#

clear efm oam counters

This command clears statistical counters for various OAMPDU message types.

Syntax

clear efm oam counters [interface-list]

interface-list - unit/port

unit - Unit identifier. (Range: 1)

port - Port number or list of ports. To enter a list, separate nonconsecutive port
identifiers with a comma and no spaces; use a hyphen to designate a range of ports.
(Range: 1-12)

Command Mode

Privileged Exec

Example

Console#clear efm oam counters

Console#

Related Commands

show efm oam counters interface (569)

efm oam remote-loopback

This command starts or stops OAM loopback test mode to the attached CPE.

Syntax

efm oam remote-loopback {start | stop} interface

start - Starts remote loopback test mode.

stop - Stops remote loopback test mode.

interface - unit/port

unit - Unit identifier. (Range: 1)

port - Port number. (Range: 1-12)

Advertising