Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 853)

Brocade 6910 Ethernet Access Switch Configuration Guide 803
53-1002581-01
Configuring a Class Map
39
• IP DSCP – A DSCP value. (Range: 0-63)
• IP Precedence – An IP Precedence value. (Range: 0-7)
• IPv6 DSCP – A DSCP value contained in an IPv6 packet. (Range: 0-63)
• VLAN ID – A VLAN. (Range:1-4093)
• CoS – A CoS value. (Range: 0-7)
• Source Port – A source port. (Range: 1-12)
Interface
To configure a class map:
1. Click Traffic, DiffServ.
2. Select Configure Class from the Step list.
3. Select Add from the Action list.
4. Enter a class name.
5. Enter a description.
6. Click Add.
FIGURE 148 Configuring a Class Map
To show the configured class maps:
1. Click Traffic, DiffServ.
2. Select Configure Class from the Step list.
3. Select Show from the Action list.
FIGURE 149 Showing Class Maps