Revision, Spanning-tree bpdu-filter, Revision spanning-tree bpdu-filter – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 394: Revision (344)
344
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Spanning Tree Commands
18
Command Usage
The MST region name and revision number (
) are used to designate a unique MST region.
A bridge (i.e., spanning-tree compliant device such as this switch) can only belong to one MST
region. And all bridges in the same region must be configured with the same MST instances.
Example
Console(config-mstp)#name R&D
Console(config-mstp)#
Related Commands
revision
This command configures the revision number for this multiple spanning tree configuration of this
switch. Use the no form to restore the default.
Syntax
revision number
number - Revision number of the spanning tree. (Range: 0-65535)
Default Setting
0
Command Mode
MST Configuration
Command Usage
The MST region name (
) and revision number are used to designate a unique MST region.
A bridge (i.e., spanning-tree compliant device such as this switch) can only belong to one MST
region. And all bridges in the same region must be configured with the same MST instances.
Example
Console(config-mstp)#revision 1
Console(config-mstp)#
Related Commands
spanning-tree bpdu-filter
This command filters all BPDUs received on an edge port. Use the no form to disable this feature.
Syntax
[no] spanning-tree bpdu-filter
Default Setting
Disabled