Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 896)

846 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Network Access (MAC Address Authentication)
41
Parameters
These parameters are displayed:
• Query By – Specifies parameters to use in the MAC address query.
• Sort Key – Sorts the information displayed based on MAC address, port interface, or
attribute.
• MAC Address – Specifies a specific MAC address.
• Interface – Specifies a port interface.
• Attribute – Displays static or dynamic addresses.
• Authenticated MAC Address List
• MAC Address – The authenticated MAC address.
• Interface – The port interface associated with a secure MAC address.
• RADIUS Server – The IP address of the RADIUS server that authenticated the MAC
address.
• Time – The time when the MAC address was last authenticated.
• Attribute – Indicates a static or dynamic address.
Interface
To display the authenticated MAC addresses stored in the secure MAC address table:
1. Click Security, Network Access.
2. Select Show Information from the Step list.
3. Use the sort key to display addresses based MAC address, interface, or attribute.
4. Restrict the displayed addresses by entering a specific address in the MAC Address field,
specifying a port in the Interface field, or setting the address type to static or dynamic in the
Attribute field.
5. Click Query.
FIGURE 187 Showing Addresses Authenticated for Network Access