Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 137)

Brocade 6910 Ethernet Access Switch Configuration Guide 87
53-1002581-01
Event Logging
5
Example
Console(config)#logging on
Console(config)#
Related Commands
logging history (85)
logging trap (87)
clear log (87)
logging trap
This command enables the logging of system messages to a remote server, or limits the syslog
messages saved to a remote server based on severity. Use this command without a specified level
to enable remote logging. Use the no form to disable remote logging.
Syntax
logging trap [level level]
no logging trap [level]
level - One of the syslog severity levels listed in the table on page 85 . Messages sent
include the selected level through level 0.
Default Setting
Disabled
Level 7
Command Mode
Global Configuration
Command Usage
• Using this command with a specified level enables remote logging and sets the minimum
severity level to be saved.
• Using this command without a specified level also enables remote logging, but restores the
minimum severity level to the default.
Example
Console(config)#logging trap 4
Console(config)#
clear log
This command clears messages from the log buffer.
Syntax
clear log [flash | ram]
flash - Event history stored in flash memory (i.e., permanent memory).
ram - Event history stored in temporary RAM (i.e., memory flushed on power reset).