Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 1045)

Brocade 6910 Ethernet Access Switch Configuration Guide 995
53-1002581-01
Connectivity Fault Management
42
• AIS Status – Shows if MEPs within the specified MA are enabled to send frames with AIS
information following detection of defect conditions.
• AIS Period – The interval at which AIS information is sent.
• AIS Transmit Level – The maintenance level at which AIS information will be sent for the
specified MEP.
• Suppress Alarm – Shows if the specified MEP is configured to suppress sending frames
containing AIS information following the detection of defect conditions.
• Suppressing Alarms – Shows if the specified MEP is currently suppressing sending frames
containing AIS information following the detection of defect conditions.
Interface
To show detailed information for the MEPs configured on this device:
1. Click Administration, CFM.
2. Select Show Information from the Step list.
3. Select Show Local MEP Details from the Action list.
4. Select an entry from MD Index and MA Index.
5. Select a MEP ID.
FIGURE 303 Showing Detailed Information on Local MEPs