Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 765)

Brocade 6910 Ethernet Access Switch Configuration Guide 715
53-1002581-01
Traffic Segmentation
33
Interface
To configure the members of the traffic segmentation group:
1. Click Interface, Traffic Segmentation.
2. Select Configure Session from the Step list.
3. Select Add from the Action list.
4. Enter the session ID, set the direction to uplink or downlink, and select the interface to add.
5. Click Apply.
FIGURE 69 Configuring Members for Traffic Segmentation
To show the members of the traffic segmentation group:
1. Click Interface, Traffic Segmentation.
2. Select Configure Session from the Step list.
3. Select Show from the Action list.
FIGURE 70 Showing Traffic Segmentation Members