Displaying lacp port counters, Figure 59, Confi – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 753: Figure 60, Table 154

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

703

53-1002581-01

Trunk Configuration

33

FIGURE 59

Configuring Connection Settings for Dynamic Trunks

To display connection parameters for a dynamic trunk:

1. Click Interface, Trunk, Dynamic.

2. Select Configure Trunk from the Step List.

3. Select Show from the Action List.

FIGURE 60

Displaying Connection Parameters for Dynamic Trunks

Displaying LACP Port Counters

Use the Interface > Trunk > Dynamic (Configure Aggregation Port - Show Information - Counters)
page to display statistics for LACP protocol messages.

CLI References

“show lacp” on page 297

Parameters

These parameters are displayed:

TABLE 154

LACP Port Counters

Parameter

Description

LACPDUs Sent

Number of valid LACPDUs transmitted from this channel group.

LACPDUs Received

Number of valid LACPDUs received on this channel group.

Marker Sent

Number of valid Marker PDUs transmitted from this channel group.

Marker Received

Number of valid Marker PDUs received by this channel group.

Advertising