Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 375)

Brocade 6910 Ethernet Access Switch Configuration Guide 325
53-1002581-01
Automatic Traffic Control Commands
16
show auto-traffic-control
This command shows global configuration settings for automatic storm control.
Command Mode
Privileged Exec
Example
Console#show auto-traffic-control
Storm Control Broadcast
Apply Timer (sec) : 300
Release Timer (sec) : 900
Storm Control Multicast
Apply Timer (sec) : 300
Release Timer (sec) : 900
Console#
show auto-traffic-control interface
This command shows interface configuration settings and storm control status for the specified
port.
Syntax
show auto-traffic-control interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
Command Mode
Privileged Exec
Example
Console#show auto-traffic-control interface ethernet 1/1
Eth 1/1 Information
------------------------------------------------------------------------
Storm Control: Broadcast Multicast
State: Disabled Disabled
Action: Rate Control Rate Control
Auto Release Control: Disabled Disabled
Alarm Fire Threshold(Kpps): 128 128
Alarm Clear Threshold(Kpps):128 128
Trap Storm Fire: Disabled Disabled
Trap Storm Clear: Disabled Disabled
Trap Traffic Apply: Disabled Disabled
Trap Traffic Release: Disabled Disabled
------------------------------------------------------------------------
Console#