Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 380)

330 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Address Table Commands
17
• The mask should be hexadecimal numbers (representing an equivalent bit mask) in the form
xx-xx-xx-xx-xx-xx that is applied to the specified MAC address. Enter hexadecimal numbers,
where an equivalent binary bit “0” means to match a bit and “1” means to ignore a bit. For
example, a mask of 00-00-00-00-00-00 means an exact match, and a mask of
FF-FF-FF-FF-FF-FF means “any.”
• The maximum number of address entries is 16K.
Example
Console#show mac-address-table
Total entry in system: 3
Interface MAC Address VLAN Type Life Time
--------- ----------------- ---- -------- -----------------
CPU 70-72-CF-32-DD-FD 1 CPU Delete on Reset
Eth 1/ 1 00-E0-0C-10-90-09 1 Learn Delete on Timeout
Eth 1/ 1 00-E0-29-94-34-64 1 Learn Delete on Timeout
Console#
show mac-address-table aging-time
This command shows the aging time for entries in the address table.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table aging-time
Aging Status : Enabled
Aging Time: 300 sec.
Console#
show mac-address-table count
This command shows the number of MAC addresses used and the number of available MAC
addresses for the overall system or for an interface.
Syntax
show mac-address-table count interface interface
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12)
port-channel channel-id (Range: 1-12)
Default Setting
None