Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 437)

Brocade 6910 Ethernet Access Switch Configuration Guide 387
53-1002581-01
Displaying VLAN Information
20
Displaying VLAN Information
This section describes commands used to display VLAN information.
show vlan
This command shows VLAN information.
Syntax
show vlan [id vlan-id | name vlan-name]
id - Keyword to be followed by the VLAN ID.
vlan-id - ID of the configured VLAN. (Range: 1-4093)
name - Keyword to be followed by the VLAN name.
vlan-name - ASCII string from 1 to 32 characters.
Default Setting
Shows all VLANs.
Command Mode
Normal Exec, Privileged Exec
Example
The following example shows how to display information for VLAN 1:
Console#show vlan id 1
VLAN ID: 1
Type: Static
Name: DefaultVlan
Status: Active
Ports/Port Channels : Eth1/ 1(S) Eth1/ 2(S) Eth1/ 3(S) Eth1/ 4(S) Eth1/ 5(S)
Eth1/ 6(S) Eth1/ 7(S) Eth1/ 8(S) Eth1/ 9(S) Eth1/10(S)
Eth1/11(S) Eth1/12(S)
Console#
TABLE 86 Commands for Displaying VLAN Information
Command Function Mode
show interfaces status vlan Displays status for the specified VLAN interface NE, PE
show interfaces switchport Displays the administrative and operational status of an interface NE, PE
show vlan Shows VLAN information NE, PE