Web-auth login-attempts, Web-auth quiet-period, Web-auth login-attempts web-auth quiet-period – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 261

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

211

53-1002581-01

Web Authentication

10

web-auth login-attempts

This command defines the limit for failed web authentication login attempts. After the limit is
reached, the switch refuses further login attempts until the quiet time expires. Use the no form to
restore the default.

Syntax

web-auth login-attempts count

no web-auth login-attempts

count - The limit of allowed failed login attempts. (Range: 1-3)

Default Setting

3 login attempts

Command Mode

Global Configuration

Example

Console(config)#web-auth login-attempts 2

Console(config)#

web-auth quiet-period

This command defines the amount of time a host must wait after exceeding the limit for failed login
attempts, before it may attempt web authentication again. Use the no form to restore the default.

Syntax

web-auth quiet-period time

no web-auth quiet period

time - The amount of time the host must wait before attempting authentication again.
(Range: 1-180 seconds)

Default Setting

60 seconds

web-auth re-authenticate (Port)

Ends all web authentication sessions on the port and forces
the users to re-authenticate

PE

web-auth re-authenticate (IP)

Ends the web authentication session associated with the
designated IP address and forces the user to re-authenticate

PE

show web-auth

Displays global web authentication parameters

PE

show web-auth interface

Displays interface-specific web authentication parameters
and statistics

PE

show web-auth summary

Displays a summary of web authentication port parameters
and statistics

PE

TABLE 52

Web Authentication (Continued)

Command

Function

Mode

Advertising