Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 825)

Brocade 6910 Ethernet Access Switch Configuration Guide 775
53-1002581-01
Configuring Multiple Spanning Trees
36
4. Specify the MST instance identifier and the initial VLAN member. Additional member can be
added using the Spanning Tree > MSTP (Configure Global - Add Member) page. If the priority is
not specified, the default value 32768 is used.
5. Click Apply.
FIGURE 123 Creating an MST Instance
To show the MSTP instances:
1. Click Spanning Tree, MSTP.
2. Select Configure Global from the Step list.
3. Select Show from the Action list.
FIGURE 124 Displaying MST Instances
To modify the priority for an MST instance:
1. Click Spanning Tree, MSTP.
2. Select Configure Global from the Step list.
3. Select Modify from the Action list.
4. Modify the priority for an MSTP Instance.