Telnet server, Ip telnet max-sessions, Table 42 – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 214

Advertising
background image

164

Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002581-01

Telnet Server

9

Telnet Server

This section describes commands used to configure Telnet management access to the switch.

NOTE

This switch also supports a Telnet client function. A Telnet connection can be made from this switch
to another device by entering the telnet command at the Privileged Exec configuration level.

ip telnet max-sessions

This command specifies the maximum number of Telnet sessions that can simultaneously connect
to this system. Use the no from to restore the default setting.

Syntax

ip telnet max-sessions session-count

no ip telnet max-sessions

session-count - The maximum number of allowed Telnet session. (Range: 0-8)

Default Setting

8 sessions

Command Mode

Global Configuration

Command Usage

A maximum of eight sessions can be concurrently opened for Telnet and Secure Shell (i.e., both
Telnet and SSH share a maximum number or eight sessions).

Example

Console(config)#ip telnet max-sessions 1

Console(config)#

TABLE 42

Telnet Server Commands

Command

Function

Mode

ip telnet max-sessions

Specifies the maximum number of Telnet sessions that can
simultaneously connect to this system

GC

ip telnet port

Specifies the port to be used by the Telnet interface

GC

ip telnet server

Allows the switch to be monitored or configured from Telnet

GC

show ip telnet

Displays configuration settings for the Telnet server

PE

Advertising