Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 577)

Brocade 6910 Ethernet Access Switch Configuration Guide 527
53-1002581-01
CFM Commands
25
Command Usage
• Each MA name must be unique within the CFM domain.
• Frames with AIS information can be issued at the client’s maintenance level by a MEP upon
detecting defect conditions. For example, defect conditions may include:
• Signal failure conditions if continuity checks are enabled.
• AIS condition or LCK condition if continuity checks are disabled.
• A MEP continues to transmit periodic frames with AIS information until the defect condition is
removed.
Example
This example enables the MEPs within the specified MA to send frames with AIS information.
Console(config)#ethernet cfm ais md voip ma rd
Console(config)#
ethernet cfm ais period
This command configures the interval at which AIS information is sent. Use the no form to restore
the default setting.
Syntax
ethernet cfm ais period period md domain-name ma ma-name
no ethernet cfm ais period md domain-name ma ma-name
period – The interval at which AIS information is sent. (Options: 1 second, 60 seconds)
domain-name – Domain name. (Range: 1-43 alphanumeric characters)
ma-name – Maintenance association name. (Range: 1-43 alphanumeric characters,
maximum length is 44 minus the length of the domain name)
Default Setting
1 second
Command Mode
Global Configuration
Example
This example sets the interval for sending frames with AIS information at 60 seconds.
Console(config)#ethernet cfm ais period 60 md voip ma rd
Console(config)#