Dot1x max-reauth-req, Dot1x max-req, Dot1x max-reauth-req dot1x max-req – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 228
178
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
802.1X Port Authentication
9
dot1x max-reauth-req
This command sets the maximum number of times that the switch sends an EAP-request/identity
frame to the client before restarting the authentication process. Use the no form to restore the
default.
Syntax
dot1x max-reauth-req count
no dot1x max-reauth-req
count – The maximum number of requests (Range: 1-10)
Default
2
Command Mode
Interface Configuration
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-reauth-req 2
Console(config-if)#
dot1x max-req
This command sets the maximum number of times the switch port will retransmit an EAP
request/identity packet to the client before it times out the authentication session. Use the no form
to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
Default
2
Command Mode
Interface Configuration
Example
Console(config)#interface eth 1/2
Console(config-if)#dot1x max-req 2
Console(config-if)#