Table 173 – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 973
Brocade 6910 Ethernet Access Switch Configuration Guide
923
53-1002581-01
Link Layer Discovery Protocol
42
Parameters
These parameters are displayed:
Port
•
Local Port – The local port to which a remote LLDP-capable device is attached.
•
Chassis ID – An octet string indicating the specific identifier for the particular chassis in this
system.
•
Port ID – A string that contains the specific identifier for the port from which this LLDPDU was
transmitted.
•
System Name – A string that indicates the system’s administratively assigned name.
Port Details
•
Port – Port identifier on local switch.
•
Remote Index – Index of remote device attached to this port.
•
Local Port – The local port to which a remote LLDP-capable device is attached.
•
Chassis Type – Identifies the chassis containing the IEEE 802 LAN entity associated with the
transmitting LLDP agent. There are several ways in which a chassis may be identified and a
chassis ID subtype is used to indicate the type of component being referenced by the chassis
ID field. (See
•
Chassis ID – An octet string indicating the specific identifier for the particular chassis in this
system.
•
System Name – A string that indicates the system’s assigned name.
•
System Description – A textual description of the network entity.
•
Port Type – Indicates the basis for the identifier that is listed in the Port ID field.
•
Port Description – A string that indicates the port’s description. If RFC 2863 is implemented,
the ifDescr object should be used for this field.
•
Port ID – A string that contains the specific identifier for the port from which this LLDPDU was
transmitted.
•
System Capabilities Supported – The capabilities that define the primary function(s) of the
system. (See
TABLE 173
Port ID Subtype
ID Basis
Reference
Interface alias
IfAlias (IETF RFC 2863)
Chassis component
EntPhysicalAlias when entPhysClass has a value of ‘chassis(3)’ (IETF RFC 2737)
Port component
EntPhysicalAlias when entPhysicalClass has a value ‘port(10)’ or ‘backplane(4)’
(IETF RFC 2737)
MAC address
MAC address (IEEE Std 802-2001)
Network address
networkAddress
Interface name
ifName (IETF RFC 2863)
Agent circuit ID
agent circuit ID (IETF RFC 3046)
Locally assigned
locally assigned