Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 246)

196 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Port Security
10
Example
This example shows the port security settings and number of secure addresses for all ports.
Console#show port security
Global Port Security Parameters
Secure MAC Aging Mode : Disabled
Port Security Port Summary
Port Port Security Port Status Intrusion Action MaxMacCnt CurrMacCnt
--------------------------------------------------------------------------
Eth 1/ 1 Disabled Secure/Down None 0 2
Eth 1/ 2 Enabled Secure/Up None 10 0
Eth 1/ 3 Disabled Secure/Down None 0 0
Eth 1/ 4 Disabled Secure/Down None 0 0
Eth 1/ 5 Disabled Secure/Down None 0 0
Eth 1/ 6 Disabled Secure/Down None 0 0
Eth 1/ 7 Disabled Secure/Down None 0 0
Eth 1/ 8 Disabled Secure/Down None 0 0
Eth 1/ 9 Disabled Secure/Down None 0 0
Eth 1/10 Disabled Secure/Down None 0 0
Eth 1/11 Disabled Secure/Down None 0 0
Eth 1/12 Disabled Secure/Down None 0 0
Console#
The following example shows the port security settings and number of secure addresses for a
specific port. The Last Intrusion MAC and Last Time Detected Intrusion MAC fields show
information about the last detected intrusion MAC address. These fields are not applicable if no
intrusion has been detected or port security is disabled. The MAC Filter ID field is configured by the
network-access port-mac-filter command. If this field displays Disabled, then any unknown source
MAC address can be learned as a secure MAC address. If it displays a filter identifier, then only
source MAC address entries in MAC Filter table can be learned as secure MAC addresses.
Console#show port security interface ethernet 1/2
Global Port Security Parameters
Secure MAC aging mode : Disabled
Port Security Details
Port : 1/2
Port Security : Enabled
Port Status : SecureUp
Intrusion Action : None
Max-MAC-Count : 0
Current MAC Count : 0
TABLE 49 show port security - display description
Field Description
Port Security The configured status (enabled or disabled).
Port Status The operational status:
•
Secure/Down – Port security is disabled.
•
Secure/Up – Port security is enabled.
•
Shutdown – Port is shut down due to a response to a port security violation.
Intrusion Action The configured intrusion response.
MaxMacCnt The maximum number of addresses which can be stored in the address table for this
interface (either dynamic or static).
CurrMacCnt The current number of secure entries in the address table.