Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 202)

152 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
TACACS+ Client
9
Command Mode
Global Configuration
Example
Console(config)#tacacs-server port 181
Console(config)#
tacacs-server retransmit
This command sets the number of retries. Use the no form to restore the default.
Syntax
tacacs-server retransmit number-of-retries
no tacacs-server retransmit
number-of-retries - Number of times the switch will try to authenticate logon access via the
TACACS+ server. (Range: 1 - 30)
Default Setting
2
Command Mode
Global Configuration
Example
Console(config)#tacacs-server retransmit 5
Console(config)#
tacacs-server timeout
This command sets the interval between transmitting authentication requests to the TACACS+
server. Use the no form to restore the default.
Syntax
tacacs-server timeout number-of-seconds
no tacacs-server timeout
number-of-seconds - Number of seconds the switch waits for a reply before resending a
request. (Range: 1-540)
Default Setting
5
Command Mode
Global Configuration
Example
Console(config)#tacacs-server timeout 10
Console(config)#