Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 905)

Brocade 6910 Ethernet Access Switch Configuration Guide 855
53-1002581-01
Configuring Secure Shell
41
CLI References
• “Secure Shell” on page 166
Parameters
These parameters are displayed:
• User Name – This drop-down box selects the user who’s public key you wish to manage. Note
that you must first create users on the User Accounts page (see
“Configuring User Accounts”
on page 835).
• User Key Type – The type of public key to upload.
• RSA: The switch accepts a RSA version 1 encrypted public key.
• DSA: The switch accepts a DSA version 2 encrypted public key.
The SSH server uses RSA or DSA for key exchange when the client first establishes a
connection with the switch, and then negotiates with the client to select either DES (56-bit) or
3DES (168-bit) for data encryption.
The switch uses only RSA Version 1 for SSHv1.5 clients and DSA Version 2 for SSHv2 clients.
• TFTP Server IP Address – The IP address of the TFTP server that contains the public key file you
wish to import.
• Source File Name – The public key file to upload.
Interface
To copy the SSH user’s public key:
1. Click Security, SSH.
2. Select Configure User Key from the Step list.
3. Select Copy from the Action list.
4. Select the user name and the public-key type from the respective drop-down boxes, input the
TFTP server IP address and the public key source file name.
5. Click Apply.
FIGURE 193 Copying the SSH User’s Public Key
To display or clear the SSH user’s public key:
1. Click Security, SSH.
2. Select Configure User Key from the Step list.