Network-access link-detection link-down, Network-access link-detection link-up – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 253

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

203

53-1002581-01

Network Access (MAC Address Authentication)

10

network-access link-detection link-down

Use this command to detect link-down events. When detected, the switch can shut down the port,
send an SNMP trap, or both. Use the no form of this command to disable this feature.

Syntax

network-access link-detection link-down action [shutdown | trap | trap-and-shutdown]

no network-access link-detection

action - Response to take when port security is violated.

shutdown - Disable port only.

trap - Issue SNMP trap message only.

trap-and-shutdown - Issue SNMP trap message and disable the port.

Default Setting

Disabled

Command Mode

Interface Configuration

Example

Console(config)#interface ethernet 1/1

Console(config-if)#network-access link-detection link-down action trap

Console(config-if)#

network-access link-detection link-up

Use this command to detect link-up events. When detected, the switch can shut down the port,
send an SNMP trap, or both. Use the no form of this command to disable this feature.

Syntax

network-access link-detection link-up action [shutdown | trap | trap-and-shutdown]

no network-access link-detection

action - Response to take when port security is violated.

shutdown - Disable port only.

trap - Issue SNMP trap message only.

trap-and-shutdown - Issue SNMP trap message and disable the port.

Default Setting

Disabled

Command Mode

Interface Configuration

Advertising