Figure 388 confi – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 1149

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

1099

53-1002581-01

Multicast VLAN Registration for IPv6

46

Parameters

These parameters are displayed:

Configure Profile

Profile Name – The name of a profile containing one or more MVR6 group addresses.
(Range: 1-21 characters)

Start IPv6 Address – Starting IP address for an MVR6 multicast group. This parameter must be
a full IPv6 address including the network prefix and host address bits.

End IPv6 Address – Ending IP address for an MVR6 multicast group. This parameter must be a
full IPv6 address including the network prefix and host address bits.

Associate Profile

Domain ID – An independent multicast domain. (Range: 1-5)

Profile Name – The name of a profile to be assigned to this domain. (Range: 1-20 characters)

Interface

To configure an MVR6 group address profile:

1. Click Multicast, MVR6.

2. Select Configure Profile from the Step list.

3. Select Add from the Action list.

4. Enter the name of a group profile to be assigned to one or more domains, and specify a

multicast group that will stream traffic to participating hosts.

5. Click Apply.

FIGURE 388

Configuring an MVR6 Group Address Profile

To show the configured MVR6 group address profiles:

1. Click Multicast, MVR6.

2. Select Configure Profile from the Step list.

3. Select Show from the Action list.

Advertising