Oam commands, Efm oam, Chapter 26 – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 613: Table 133, Chapter

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

563

53-1002581-01

Chapter

26

OAM Commands

The switch provides OAM (Operation, Administration, and Maintenance) remote management tools
required to monitor and maintain the links to subscriber CPEs (Customer Premise Equipment). This
section describes functions including enabling OAM for selected ports, loop back testing, and
displaying device information.

efm oam

This command enables OAM functions on the specified port. Use the no form to disable this
function.

Syntax

[no] efm oam

TABLE 133

OAM Commands

Command

Function

Mode

efm oam

Enables OAM services

IC

efm oam critical-link-event

Enables reporting of critical event or dying gasp

IC

efm oam link-monitor frame

Enables reporting of errored frame link events

IC

efm oam link-monitor frame
threshold

Sets the threshold for errored frame link events

IC

efm oam link-monitor frame
window

Sets the monitor period for errored frame link events

IC

efm oam mode

Sets the OAM operational mode to active or passive

IC

clear efm oam counters

Clears statistical counters for various OAMPDU message
types

PE

efm oam remote-loopback

Initiates or terminates remote loopback test

PE

efm oam remote-loopback
test

Performs remote loopback test, sending a specified number
of packets

PE

show efm oam counters
interface

Displays counters for various OAM PDU message types

NE,PE

show efm oam event-log
interface

Displays OAM event log

NE,PE

show efm oam
remote-loopback interface

Displays results of OAM remote loopback test

NE,PE

show efm oam status
interface

Displays OAM configuration settings and event counters

NE,PE

show efm oam status
remote interface

Displays information about attached OAM-enabled devices

NE,PE

Advertising