Mvr associated-profile, Mvr mvr associated-profile – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 526

Advertising
background image

476

Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002581-01

MVR for IPv4

23

mvr

This command enables Multicast VLAN Registration (MVR) globally on the switch. Use the no form
of this command to globally disable MVR.

Syntax

[no] mvr

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

Only IGMP version 2 or 3 hosts can issue multicast join or leave messages. If MVR must be
configured for an IGMP version 1 host, the multicast groups must be statically assigned using the

mvr vlan group

command.

Example

The following example enables MVR globally.

Console(config)#mvr

Console(config)#

mvr associated-profile

This command binds the MVR group addresses specified in a profile to an MVR domain. Use the no
form of this command to remove the binding.

Syntax

[no] mvr domain domain-id associated-profile profile-name

domain-id - An independent multicast domain. (Range: 1-5)

profile-name - The name of a profile containing one or more MVR group addresses.
(Range: 1-21 characters)

Default Setting

Disabled

Command Mode

Global Configuration

Example

The following an MVR group address profile to domain 1:

Console(config)#mvr domain 1 associated-profile rd

Console(config)#

Advertising