Static multicast routing, Ip igmp snooping vlan mrouter, Table 107 – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 516: Table 108

Advertising
background image

466

Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002581-01

Static Multicast Routing

23

Number of Leaves Sent : 0

Console#

Static Multicast Routing

This section describes commands used to configure static multicast routing on the switch

.

ip igmp snooping vlan mrouter

This command statically configures a (Layer 2) multicast router port on the specified VLAN. Use the
no form to remove the configuration.

Syntax

[no] ip igmp snooping vlan vlan-id mrouter interface

vlan-id - VLAN ID (Range: 1-4093)

interface

ethernet unit/port

unit - Unit identifier. (Range: 1)

port - Port number. (Range: 1-12)

port-channel channel-id (Range: 1-12)

Default Setting

No static multicast router ports are configured.

Command Mode

Global Configuration

TABLE 107

show ip igmp snooping statistics vlan query - display description

Field

Description

Querier IP Address

The IP address of the querier on this interface.

Querier Expire Time

The time after which this querier is assumed to have expired.

General Query Received

The number of general queries received on this interface.

General Query Sent

The number of general queries sent from this interface.

Specific Query Received

The number of specific queries received on this interface.

Specific Query Sent

The number of specific queries sent from this interface.

Number of Reports Sent

The number of reports sent from this interface.

Number of Leaves Sent

The number of leaves sent from this interface.

TABLE 108

Static Multicast Interface Commands

Command

Function

Mode

ip igmp snooping vlan mrouter

Adds a multicast router port

GC

show ip igmp snooping mrouter

Shows multicast router ports

PE

Advertising