Multicast vlan registration for ipv4, Figure 372 m, Multicast vlan – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 1131: Registration for ipv4

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

1081

53-1002581-01

Multicast VLAN Registration for IPv4

46

Multicast VLAN Registration for IPv4

Multicast VLAN Registration (MVR) is a protocol that controls access to a single network-wide VLAN
most commonly used for transmitting multicast traffic (such as television channels or
video-on-demand) across a service provider’s network. Any multicast traffic entering an MVR VLAN
is sent to all attached subscribers. This protocol can significantly reduce to processing overhead
required to dynamically monitor and establish the distribution tree for a normal multicast VLAN.
This makes it possible to support common multicast services over a wide part of the network
without having to use any multicast routing protocol.

MVR maintains the user isolation and data security provided by VLAN segregation by passing only
multicast traffic into other VLANs to which the subscribers belong. Even though common multicast
streams are passed onto different VLAN groups from the MVR VLAN, users in different IEEE 802.1Q
or private VLANs cannot exchange any information (except through upper-level routing services).

FIGURE 372

MVR Concept

Command Usage

General Configuration Guidelines for MVR:

1. Enable MVR for a domain on the switch, and select the MVR VLAN (see

“Configuring MVR

Domain Settings”

on page 1083).

2. Create an MVR profile by specifying the multicast groups that will stream traffic to

attached hosts, and assign the profile to an MVR domain (see

“Configuring MVR Group

Address Profiles”

on page 1084).

3. Set the interfaces that will join the MVR as source ports or receiver ports (see

“Configuring

MVR Interface Status”

on page 1087).

4. For multicast streams that will run for a long term and be associated with a stable set of

hosts, you can statically bind the multicast group to the participating interfaces (see

“Assigning Static MVR Multicast Groups to Interfaces”

on page 1089).

Multicast Router

Layer 2 Switch

Multicast Server

PC

TV

TV

Set-top Box

Set-top Box

Satellite Services

Service
Network

Source

Port

Receiver

Ports

Advertising