Setting community access strings, Figure 254 cre, Figure 255 s – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 988
Advertising
938
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Simple Network Management Protocol
42
4. Enter a group name, assign a security model and level, and then select read, write, and notify
views.
5. Click Apply
FIGURE 254
Creating an SNMP Group
To show SNMP groups:
1. Click Administration, SNMP.
2. Select Configure Group from the Step list.
3. Select Show from the Action list.
FIGURE 255
Showing SNMP Groups
Setting Community Access Strings
Use the Administration > SNMP (Configure User - Add Community) page to configure up to five
community strings authorized for management access by clients using SNMP v1 and v2c. For
security reasons, you should consider removing the default strings.
CLI References
•
Advertising