Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 755)

Brocade 6910 Ethernet Access Switch Configuration Guide 705
53-1002581-01
Trunk Configuration
33
Parameters
These parameters are displayed:
Interface
To display LACP settings and status for the local side:
1. Click Interface, Trunk, Dynamic.
2. Select Configure Aggregation Port from the Step list.
3. Select Show Information from the Action list.
4. Click Internal.
5. Select a group member from the Port list.
TABLE 155 LACP Internal Configuration Information
Parameter Description
LACP System Priority LACP system priority assigned to this port channel.
LACP Port Priority LACP port priority assigned to this interface within the channel group.
Admin Key Current administrative value of the key for the aggregation port.
Oper Key Current operational value of the key for the aggregation port.
LACPDUs Interval Number of seconds before invalidating received LACPDU information.
Admin State,
Oper State Administrative or operational values of the actor’s state parameters:
◆ Expired – The actor’s receive machine is in the expired state;
◆ Defaulted – The actor’s receive machine is using defaulted
operational partner information, administratively configured for
the partner.
◆ Distributing – If false, distribution of outgoing frames on this link
is disabled; i.e., distribution is currently disabled and is not
expected to be enabled in the absence of administrative changes
or changes in received protocol information.
◆ Collecting – Collection of incoming frames on this link is enabled;
i.e., collection is currently enabled and is not expected to be
disabled in the absence of administrative changes or changes in
received protocol information.
◆ Synchronization – The System considers this link to be IN_SYNC;
i.e., it has been allocated to the correct Link Aggregation Group,
the group has been associated with a compatible Aggregator, and
the identity of the Link Aggregation Group is consistent with the
System ID and operational Key information transmitted.
◆ Aggregation – The system considers this link to be aggregatable;
i.e., a potential candidate for aggregation.
◆ Long timeout – Periodic transmission of LACPDUs uses a slow
transmission rate.
◆ LACP-Activity – Activity control value with regard to this link.
(0: Passive; 1: Active)