Table 67 – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 348

Advertising
background image

298

Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002581-01

Link Aggregation Commands

13

Console#show lacp 1 internal

Port Channel : 1

-------------------------------------------------------------------------

Oper Key : 3

Admin Key : 0

Timeout : long

Eth 1/ 1

-------------------------------------------------------------------------

LACPDUs Internal : 30 seconds

LACP System Priority : 32768

LACP Port Priority : 32768

Admin Key : 3

Oper Key : 3

Admin State : defaulted, aggregation, long timeout, LACP-activity

Oper State : distributing, collecting, synchronization,

aggregation, long timeout, LACP-activity

.

.

.

TABLE 67

show lacp internal - display description

Field

Description

Oper Key

Current operational value of the key for the aggregation port.

Admin Key

Current administrative value of the key for the aggregation port.

Timeout

Time to wait for the next LACPDU before deleting partner port information.

LACPDUs Internal

Number of seconds before invalidating received LACPDU information.

LACP System Priority LACP system priority assigned to this port channel.

LACP Port Priority

LACP port priority assigned to this interface within the channel group.

Admin State,
Oper State

Administrative or operational values of the actor’s state parameters:

Expired – The actor’s receive machine is in the expired state;

Defaulted – The actor’s receive machine is using defaulted operational partner
information, administratively configured for the partner.

Distributing – If false, distribution of outgoing frames on this link is disabled; i.e.,
distribution is currently disabled and is not expected to be enabled in the absence of
administrative changes or changes in received protocol information.

Collecting – Collection of incoming frames on this link is enabled; i.e., collection is
currently enabled and is not expected to be disabled in the absence of administrative
changes or changes in received protocol information.

Synchronization – The System considers this link to be IN_SYNC; i.e., it has been
allocated to the correct Link Aggregation Group, the group has been associated with a
compatible Aggregator, and the identity of the Link Aggregation Group is consistent
with the System ID and operational Key information transmitted.

Aggregation – The system considers this link to be aggregatable; i.e., a potential
candidate for aggregation.

Long timeout – Periodic transmission of LACPDUs uses a slow transmission rate.

LACP-Activity – Activity control value with regard to this link. (0: Passive; 1: Active)

Advertising