Brocade Communications Systems Brocate Ethernet Access Switch 6910 - Manual (Page 690)

640 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Navigating the Web Browser Interface
31
Show Rule Shows the rules specified for an ACL 861
Configure Interface
Configure Binds a port to the specified ACL and time range 873
Add Mirror MIrrors matching traffic to the specified port 874
Show Mirror Shows ACLs mirrored to specified port 874
Show Hardware Counters Shows statistics for ACL hardware counters 875
ARP Inspection 876
Configure General Enables inspection globally, configures validation of additional address
components, and sets the log rate for packet inspection 877
Configure VLAN Enables ARP inspection on specified VLANs 879
Configure Interface Sets the trust mode for ports, and sets the rate
limit for packet inspection 880
Show Information
Show Statistics Displays statistics on the inspection process 881
Show Log Shows the inspection log list 882
IP Filter 883
Add Sets IP addresses of clients allowed management access via the web,
SNMP, and Telnet 883
Show Shows the addresses to be allowed management access 883
Port Security Configures per port security, including status, response for security
breach, and maximum allowed MAC addresses 885
Port Authentication IEEE 802.1X 887
Configure Global Enables authentication and EAPOL pass-through 888
Configure Interface Sets authentication parameters for individual ports 890
Show Statistics Displays protocol statistics for the selected port 895
IP Source Guard Filters IP traffic based on static entries in the IP Source Guard table, or
dynamic entries in the DHCP Snooping table 898
Port Configuration Enables IP source guard and selects filter type per port 898
Static Binding 900
Add Adds a static addresses to the source-guard binding table 900
Show Shows static addresses in the source-guard binding table 900
Dynamic Binding Displays the source-guard binding table for a selected interface 902
Administration 911
Log 911
System 911
Configure Global Stores error messages in local memory 911
Show System Logs Shows logged error messages 911
Remote Configures the logging of messages to a remote logging process 914
TABLE 151 Switch Main Menu (Continued)
Menu Description Page