Clock timezone – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual
Page 150
100
Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Time
5
Example
Console(config)#clock summer-time MESZ recurring 1 friday june 23 59 3 saturday
september 2 55 60
Console(config)#
Related Commands
clock timezone
This command sets the time zone for the switch’s internal clock.
Syntax
clock timezone name hour hours minute minutes {before-utc | after-utc}
name - Name of timezone, usually an acronym. (Range: 1-30 characters)
hours - Number of hours before/after UTC. (Range: 0-12 hours before UTC, 0-13 hours
after UTC)
minutes - Number of minutes before/after UTC. (Range: 0-59 minutes)
before-utc - Sets the local time zone before (east) of UTC.
after-utc - Sets the local time zone after (west) of UTC.
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command sets the local time zone relative to the Coordinated Universal Time (UTC, formerly
Greenwich Mean Time or GMT), based on the earth’s prime meridian, zero degrees longitude. To
display a time corresponding to your local time, you must indicate the number of hours and
minutes your time zone is east (before) or west (after) of UTC.
Example
Console(config)#clock timezone Japan hours 8 minute 0 after-UTC
Console(config)#
Related Commands