Vlan database, Vlan, Vlan database vlan – Brocade Communications Systems Brocate Ethernet Access Switch 6910 User Manual

Page 429: Database, Vlan r

Advertising
background image

Brocade 6910 Ethernet Access Switch Configuration Guide

379

53-1002581-01

Editing VLAN Groups

20

vlan database

This command enters VLAN database mode. All commands in this mode will take effect
immediately.

Default Setting

None

Command Mode

Global Configuration

Command Usage

Use the VLAN database command mode to add, change, and delete VLANs. After finishing
configuration changes, you can display the VLAN settings by entering the

show vlan

command.

Use the

interface vlan

command mode to define the port membership mode and add or

remove ports from a VLAN. The results of these commands are written to the
running-configuration file, and you can display this file by entering the

show running-config

command.

Example

Console(config)#vlan database

Console(config-vlan)#

Related Commands

show vlan (387)

vlan

This command configures a VLAN. Use the no form to restore the default settings or delete a VLAN.

Syntax

vlan vlan-id [name vlan-name] media ethernet [state {active | suspend}] [rspan]

no vlan vlan-id [name | state]

vlan-id - VLAN identifier. (Range: 1-4093)

name - Keyword to be followed by the VLAN name.

vlan-name - ASCII string from 1 to 32 characters.

media ethernet - Ethernet media type.

state - Keyword to be followed by the VLAN state.

active - VLAN is operational.

suspend - VLAN is suspended. Suspended VLANs do not pass packets.

rspan - Keyword to create a VLAN used for mirroring traffic from remote switches. The
VLAN used for RSPAN cannot include VLAN 1 (the switch’s default VLAN). For more
information on configuring RSPAN through the CLI, see

“RSPAN Mirroring Commands”

on page 304.

Advertising